Isotropic - High Volume Grades
|
MQEP powders are epoxy encapsulated magnetic powders which are ready for molding magnets without further processing. They are ready-to-use and reduce the need for in-house processing. They are applicable for compression molding only.
|
|
|
|
|
|
This grade has magnetic properties in between typical ferrite and isotropic bonded neo. MQP-12-5 is well-suited for ferrite replacement applications, such as air conditioner louver motors. It can also be used as MQFP-12-5 for applications requiring easy magnetization.
|
840-870
(8.40-8.70) |
91-101
(11.4-12.7) |
420-480
(5.3-6.0) |
|
|
This grade is a cost optimized powder grade in the MQP-13-9 powder group. In addition to spindle motors and other motors, MQP-13-9-20063-070 is ideal for certain cost sensitive ferrite replacement applications, such as CPU cooling fans, box fans and other similar applications. It has been designed to include lower cost rare earth elements such as lanthanum.
|
795-825
(7.95-8.25) |
93-106
(11.7 -13.2) |
655-735
(8.2-9.2) |
|
|
This grade is a cost optimized powder grade in the MQP-13-9 powder group. In addition to spindle motors and other motors, MQP-13-9-20063-070 is ideal for certain cost sensitive ferrite replacement applications, such as CPU cooling fans, box fans and other similar applications. It has been designed to include lower cost rare earth elements such as lanthanum.
|
795-825
(7.95-8.25) |
90-110
(12.2 - 13.8) |
700-780
(8.8-9.8) |
|
|
This grade is a cost optimized powder grade in the MQP-13-9 powder group. In addition to spindle motors and other motors, MQP-13-9-20063-070 is ideal for certain cost sensitive ferrite replacement applications, such as CPU cooling fans, box fans and other similar applications. It has been designed to include lower cost rare earth elements such as lanthanum.
|
795-825
(7.95-8.25) |
100-112
(12.6-14.1) |
720-800
(8.7-9.7) |
|
|
|
790-820
(7.90-8.20) |
99-107
(12.4-13.4) |
640-800
(8.0-10.0) |
|
|
|
790-820
(7.90-8.20) |
97-105
(12.2-13.2) |
640-800
(8.0-10.0) |
|
|
This grade is a more cost effective alternative to MQP-B-20076. Based on Nd-Pr-Fe-B alloy composition, MQP-20173 maintains similar magnetic performance as its Nd based counterpart, MQP-B-20076-070 It can be used in a wide array of products, including hard disc drive spindle motors, power tools and office equipment.
|
883-903
(8.83-9.03) |
116-124
(14.6-15.6) |
690-750
(8.7-9.4) |
|
|
This grade is a cost optimized powder grade in the MQP-B powder group. It can be used in a wide array of products, including hard disc drive spindle motors, power tools and office equipment. This MQP-B grade also does not use cobalt.
|
878-898
(8.78-8.98) |
117-125
(14.7-15.7) |
720-780
(9.1-9.8) |
|
|
This grade is a cost optimized powder grade in the MQP-B powder group. It is well suited for almost all applications, but it is especially targeted at applications that benefit from its slightly higher intrinsic coercivity (Hci) levels (~10kOe).
|
865-885
(8.65-8.85) |
116-124
(14.6-15.6) |
800-860
(10.0-10.8) |
|
|
|
883-893
(8.83-8.93) |
118-126
(14.8-15.8) |
730-790
(9.2-9.9) |
|
|
|
860-895
(8.60-8.95) |
111-126
(14.0-15.8) |
640-800
(8.0-10.0) |