Isotropic - Cost Optimized Grades

* Products with provisional data. Actual production data may vary.

(5.99)
(6.8)
(8.3)
MQP-8-5-20159 is a low cost isotropic powder designed for the manufacture of bonded magnets. Because Ce comprises 80% of the total rare earth content in MQP-8-5-20159, this powder grade allows for greater cost stability. It's relatively low Br enables MQP-8-5-20159 to be well-suited for replacing ferrite based applications which typically require magnetic properties of 5MGOe or lower.

665-685
(6.65-6.85)
59-69
(7.4-8.7)
380-440
(4.7-5.5)
MQP-11-8-20222 is one of our classic powders. It is a low cost powder designed for the use in applications that may not require the high properties typically exhibited by bonded Nd magnets.

750-770
(7.5-7.7)
83-93
(10.4-11.7)
595-655
(7.4-8.3)
This grade is a cost optimized powder grade in the MQP-13-9 powder group. It has been designed for lower flux applications.

795-825
(7.95-8.25)
100-112
(12.6 - 14.1)
720-800
(8.7-9.7)
MQP-13-9-20143 is a low cost powder designed for use in cost-sensitive applications as this powder grade is based on a patented and cost optimized Nd-Pr-Ce-Fe-B alloy composition. This material is produced by employing a proprietary rapid solidification process followed by a milling process and heat treatment.

815-845
(8.15-8.45)
100-112
(12.6-14.1)
700-780
(8.8-9.8)
MQP-14-9-20061 is an alternative material to MQP-13-9-20063. WIth a higher magnetic performance than MQP-13-9-20063, this material is designed for maximum cost-performance. MQP-14-9-20061 is also suitable for spindle motors and other costs sensitive ferrite applications like CPU cooling fans, box fans and other similar applications.

835-865
(8.35-8.65)
106-118
(13.3-14.8)
690-770
(8.7-9.7)